Ricoh Aficio SP 204SN - Specifying the Scan Settings

5. Press the [Start] key.
CTT131
6. If the original is placed on the exposure glass, press the [1] key (1: TX).
7. Replace the handset.
Specifying the Scan Settings
Adjusting image density
There are five image density levels. The darker the density level, the darker the printout.
1. Press the [Facsimile] key.
CTT125
2. Press the [ ] or [ ] key in the standby mode screen to select [Density], and then press the
[OK] key.
3. Press the [ ] or [ ] key to select the density level, and then press the [OK] key.
4. Press the [ ] key to return to the initial screen.
• To apply the specified setting to all jobs, not just the current one, specify [Density] in [Fax Features].
6. Sending and Receiving a Fax
92