Ricoh Aficio SP C231N - Page 145

Item Selections Remarks
Tray1
Horizontal
1.32mm per step. Range is -15mm to
+15mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
Vertical
0.24mm per step. Range is -3.6mm to
+3.6mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
Tray2
Horizontal (-15 to +15) step
1.32mm per step. Range is -5mm to +5mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
Vertical (-15 to +15) step
0.24mm per step. Range is -3.6mm to
+3.6mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
Bypass Tray
Horizontal
1.32mm per step. Range is -5mm to +5mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
Vertical
0.24mm per step. Range is -3.6mm to
+3.6mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
Smart Organizing Monitor
51
4