Service Program with Operation Panel
Overview
This machine has a LCD on the operation panel. Therefore, you can directly execute the service program
with the operation panel instead of the SOM.
• Ask your supervisor for entering or exiting the service mode with the operation panel.
Service Mode Menu Items on LCD
The wording and menu structures are described as shown below.
Service Menu (2nd Menu)
1st Menu 2nd Menu 3rd Menu 4th Menu
Service Mode Service Menu Toner Limit
Text
Graphics
Photograph
[200 to 400]
Step by 10, Default is 250
Engine Maintenance (2nd Menu)
1st Menu 2nd Menu 3rd Menu 4th Menu
Service Mode Engine Maintenance Brand -
0: Ricoh/ 1: SP/ 2: NRG/ 3: Lanier
1st Menu 2nd Menu 3rd Menu 4th Menu
Service Mode Engine Maintenance Destination -
[0 to 6] DFU
Service Program with Operation Panel
53
To Next Page
Loading...
