Paper and Other Media
4
1
•
The size is supported and indicated on the tray dial. Be sure to set the pa-
per size dial to match the actual paper size loaded in the tray.
•
The size is supported but not indicated on the tray dial. You should set the
tray dial to “p”, and select the paper size with the control panel.
•
The size is supported but the paper size should be set with the control pan-
el. There is no dial on the tray.
See p.19 “Loading Paper in the Bypass Tray”
See p.24 “Loading Envelopes”
Letter (LT, 8
1
/
2
× 11)
K 216 × 279 ×
L 279 × 216 ×
5
1
/
2
× 8
1
/
2
K 140 × 216 ×××
Executive (Exec., 7
1
/
4
×
10
1
/
2
)
K 184 × 276 ××
L 276 × 184 ×
Folio (8
1
/
4
× 13)
K 210 × 330 ×
Foolscap (F4, 8
1
/
2
× 13)
K 216 × 330 ×
F/GL (8 × 13) K 203 × 330 ×
Com#10 Env (4
1
/
8
× 9
1
/
2
)
K 104.8 × 241.3 ××
C5 Env (6.38 × 9.02)
K 162 ×229 ××
C6 Env (4.49 × 6.38)
K 114 ×162 ××
DL Env (4.33 × 8.66) K 110 × 220 ××
Monarch Env (3
7
/
8
× 7
1
/
2
)
K 98.4 × 190.5 ××
Custom Size - - ××
8K (10
1
/
2
× 15.35)
K 267 × 390 ×
16K (7.68 × 10
1
/
2
)
K 195 × 267 ×
L 267 × 195 ×
Feed direction
Size (mm)
Bypass Tray
Paper Tray (Tray1)
Paper Feed Unit (Tray2/3)
Envelope Feeder Unit
KirP4GB_Mainte-F6_FM_forPaper.book Page 4 Thursday, May 12, 2005 11:48 AM
To Next Page
Loading...
