Paper and Other Media Supported by This Printer
5
1
•
The size is supported, but it should be set as a custom size using the control
panel.
The supported size may differ depending on the printer language you use.
Set as a custom size setting using the control panel.
The following sizes are supported:
• Bypass Tray: approximately 90 - 305 mm in width, and 148 - 432 mm in
length.
• Paper Feed Unit (Tray 2/3): approximately 182 - 297 mm in width, and
160 - 432 mm in length.
•
The size is not supported.
❖ Input Paper Sizes (Inch version)
Feed direction
Size (inch)
Bypass Tray
Paper Tray (Tray1)
Paper Feed Unit (Tray2/3)
Envelope Feeder Unit
11 × 17 K 11 × 17 ×
Legal (LG) K
8
1
/
2
× 14
×
Letter (LT) K
8
1
/
2
× 11
×
L
11 × 8
1
/
2
×
5
1
/
2
× 8
1
/
2
K
5
1
/
2
× 8
1
/
2
×××
Executive (Exec.) K
7
1
/
4
× 10
1
/
2
××
L
10
1
/
2
× 7
1
/
4
×
A3 K 11.26 × 16.54 ×
B4 JIS K 10.12 × 14.33 ×
A4 K 8.26 × 5.83 ×
L 5.83 × 8.26 ×
B5 JIS K 7.17 × 10.12 ×
L 10.12 × 7.17 ×
A5 K 5.83 × 8.26 ×××
L 8.26 × 5.83 ××
A6 K 4.13 × 5.63 ×××
Folio K
8
1
/
4
× 13
×
KirP4GB_Mainte-F6_FM_forPaper.book Page 5 Thursday, May 12, 2005 11:48 AM
To Next Page
Loading...
