Troubleshooting
88
Remove Misfeed
Z: Duplex Unit
/ Open
Front Cover(Z)
There is a misfeed in the print-
er.
Remove the misfed paper fol-
lowing the instructions inside
the front cover (Z).
For details, see p.107 “
When
“Remove Misfeed Z: Duplex
Unit” Appears”.
Remove Paper
Standard Tray
Standard tray is full. Remove the paper from the
standard tray.
Replace Black
PCU
It is time to replace the black
PCU.
Replace the black PCU.
See p.37 “
Replacing the Pho-
to Conductor Unit”.
Replace Black
PCU soon
The time to replace the black
PCU is soon.
Prepare to replace the black
PCU when the message “Re-
place Black PCU” appears on
the display.
Replace Color
PCU
It is time to replace the color
PCU.
Replace the color PCU.
See p.37 “
Replacing the Pho-
to Conductor Unit”.
Replace Color
PCU soon
The time to replace the color
PCU is soon.
Prepare to replace the color
PCU when the message “Re-
place Color PCU” appears on
the display.
Replace
Maintenance Kit
It is time to replace the mainte-
nance kit (Paper Feed Roller,
Transfer Roller and Fusing
Unit).
Replace the new mainte-
nance kit.
Seep.51 “
Replacing the Main-
tenance Kit”.
Replace Maint.
Kit soon
The time to replace the main-
tenance kit is soon.
Prepare to replace the main-
tenance unit when the mes-
sage “Replace Maint. Kit
soon” appears on the display.
Replace
Transfer Unit
It is time to replace the transfer
unit.
Replace the transfer unit.
See p.43 “
Replacing the Inter-
mediate Transfer Unit”.
Replace Transfer
Unit soon
The time to replace the trans-
fer unit is soon.
Prepare to replace the trans-
fer unit when the message
“Replace Transfer Unit” ap-
pears on the display.
Replace Waste
Toner bottle
It is time to replace the waste
toner bottle.
Replace the waste toner bot-
tle.
See p.48 “
Replacing the
Waste Toner Bottle”.
Reset Fusing
Unit correctly
There is no fusing unit, or the
fusing unit is not installed cor-
rectly.
Set the fusing unit correctly.
Messages Description Recommended Action
To Next Page
Loading...
Need help?
General
