If You Cannot Make Copies As You Want
37
3
If You Cannot Make Copies As You Want
This section explains causes and remedies when copy results are not as expect-
ed.
❖
❖❖
❖ Basic
❖
❖❖
❖ Combine
Problem Causes Solutions
You cannot combine sever-
al functions.
Selected functions cannot
be used together.
Check the combination of functions
and make the settings again.
Reference
p.57 “Combination Chart”
Problem Causes Solutions
When using Combine,
parts of the image are not
copied.
You specified a reproduc-
tion ratio that does not
match the sizes of your
originals and copy paper.
When you specify a reproduction
ratio using the Manual Paper Select
function, make sure the ratio match-
es your originals and the copy pa-
per.
Note
❒
Select the correct reproduction
ratio before using the Combine
function.
Your originals are not iden-
tical in size and direction.
Use originals that are identical in
size and direction.
Copies are not in correct or-
der.
You placed the originals in
the incorrect order.
When placing a stack of originals in
the ADF the last page should be on
the bottom.
If you place an original on the expo-
sure glass, start with the first page to
be copied.
KirC2_AEcopyF1_FM.book Page 37 Wednesday, April 27, 2005 7:26 PM
To Next Page
Loading...
