Ricoh G600 - Assigning a Function to the ADJ. Button (ADJ BTN. SET.)

137
Changing Camera Settings
5
When functions are assigned to the ADJ. button, you can display
various shooting setting screens with fewer button operations and
without displaying the shooting setting menu.You can use [ADJ
BTN. SET.1] to [ADJ BTN. SET.4] to assign camera functions that
can be activated by pressing the ADJ. button. For information on
how to use the ADJ. button, see P.62.
To assign a function to [ADJ BTN. SET.1] to [ADJ BTN. SET.4],
follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.123.
2 Press the " button to select [ADJ BTN. SET.1] to [ADJ
BTN. SET.4], and then press the $ button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button.
Assigning a Function to the ADJ.
Button (ADJ BTN. SET.)
Available Settings Refer to
OFF *Default setting for [ADJ BTN. SET.4] -
EXPO.CMP *Default setting for [ADJ BTN. SET.1] P.86
WHT. BAL. *Default setting for [ADJ BTN. SET.2] P.87
ISO *Default setting for [ADJ BTN. SET.3] P.90
QUALITY P.69
FOCUS P.71
SHARP P.75
EXPO.MET. P.74
CONT MDE P.76
AUTO BKT P.79