Ricoh G600 - Displaying the Date and Time at Camera Startup (START DATE;TIME)

146
Changing Camera Settings
5
When [START DATE/TIME] is set to [ON], the next time you turn the
camera on and select a shooting mode, the current date and time
appear on the picture display for 4 seconds.
1 Display the SETUP menu.
• For the operating procedure, see P.123.
2 Press the " button to select [START DATE/TIME] and
press the $ button.
3 Press the !" buttons to select
[ON].
4 Press the MENU/OK button.
Displaying the Date and Time at
Camera Startup (START DATE/TIME)