Ricoh G600 - Changing the Camera Memo Mode (CAMERA MEMO MODE)

145
Changing Camera Settings
5
Image files shot with the camera contain an area where information
can be added. The camera memo function allows you to use this
area to add a memo about the picture. Before shooting a still image
with a camera memo, select [CAMERA MEMO MODE] from
[MODE1] or [MODE2] on the SETUP menu.
For details on using the camera memo function, refer to the
“Software User Guide”.
1 Display the SETUP menu.
• For the operating procedure, see P.123.
2 Press the " button to select
[CAMERA MEMO MODE] and
press the $ button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button.
Caution------------------------------------------------------------------------------------------
Camera memos are only available for Japanese or English Windows. You must also set
[LANGUAGE/N] to [ ] or [ENGLISH]. (GP.143)
Changing the Camera Memo Mode
(CAMERA MEMO MODE)
Available Settings
MODE1
*Default setting
You can change the memo items in each category on the [CAMERA
MEMO] screen.
MODE2 You can select a combination of camera memos from multiple
[CAMERA MEMO] screens. When using the camera memo function
for the first time, the first combination of memos is displayed on the
[CAMERA MEMO] screen, and each time the " button is pressed,
the items change to the second combination, third combination, and
so on. You cannot change individual memo items in each category.