EasyManua.ls Logo

Ricoh G600 - Shooting in Zoom Macro Mode

Ricoh G600
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If you are using the camera for the first time, read this section.
47
Note ---------------------------------------------------------------------------------------------------
You can also correct the skew of a previously shot still image. (GP.102)
Shooting in Zoom Macro Mode
1
Turn the mode dial to SCENE.
2
Press the MODE button.
The scene mode selection screen appears.
3
Press the !" buttons to select [ZOOM MACRO].
4
Press the MENU/OK button.
5
Press the Z (Wide-angle) or z (Telephoto) button.
The zoom level appears on the picture display.
6
Compose your picture and half-press the shutter
release button.
7
Full-press the shutter release button.
Caution-----------------------------------------------------------------------------------------------
When using the zoom macro, you can shoot close-ups within the following distances:
If [PIC QUALITY/SIZE] is set to 3648 × 2736 and [DIGITAL ZOOM IMG] is set to
[AUTO RSZ], the auto resize zoom is activated. (GP.135)
Approx. 1 cm Shooting range: approx. 14.8 mm × 11.1 mm
(when digital zoom is not used)
Shooting range: approx. 3.7 mm × 2.8 mm
(when 4.0× digital zoom is used)

Table of Contents

Related product manuals