Remarks
100
6
• Under the following conditions, the machine might not detect the original on
the exposure glass. If you press the {
{{
{Start}
}}
} key again, the machine will start
making a master anyway:
• When you set a dark original on the exposure glass.
• When the original is not centered according to the size marks on the right
scale.
• If you do not open the exposure glass cover at an angle of more than 25 de-
grees with the exposure glass when you replace originals.
• If the machine is installed under a strong light.
PinkGold-F_V4_FM.book Page 100 Tuesday, May 27, 2003 3:33 PM
To Next Page
Loading...
