Ricoh Gestetner 5430 - Setting up the Paper Delivery Tray

Preparation for Printing
11
1
Setting Up the Paper Delivery
Tray
A
AA
A
Raise the paper delivery tray
slightly, and then gently lower it.
B
BB
B
Lift the paper delivery side plates
and adjust them to the paper size.
C
CC
C
Lift the paper delivery end plate
and move it to match the print pa-
per size.
D
DD
D
Lower or lift the paper alignment
wings .
Note
❒ When the guides are up, you
might not be able to load the
unit to full capacity (1,000
sheets) depending on the paper
you are using.
❒ Lift the paper alignment wings
when B5L prints are curled.
When you use 81.4 g/m
2
, 21.6 lb
or thicker paper
A Lower the paper alignment
wings.
When you use 81.4 g/m
2
, 21.6 lb or
thinner and B5 or smaller paper
A Lower the paper alignment
wings.
When you use 81.4 g/m
2
, 21.6 lb
or thinner and A4, 8
1
/
2
× 11" or
larger paper
A Lift the paper alignment wings.
ZBHH050E
PinkGold-F_V4_FM.book Page 11 Tuesday, May 27, 2003 3:33 PM