Optional Functions
46
2
Placing Originals in the
Document Feeder
A
AA
A
Adjust the guide to the original
size.
B
BB
B
Insert the aligned originals face
up in the document feeder until
they stop.
Limitation
❒ Approximately 50 originals
(80g/m
2
, 21 lb) can be inserted
at one time in the document
feeder. The first (top) original
will be fed first.
Note
❒ To avoid a multi-sheet feed,
shuffle the originals before plac-
ing them in the document feed-
er.
❒ The guides must fit snugly
against both sides of the stack.
C
CC
C
Make the desired settings, and
then enter the number of prints
with the number keys.
D
DD
D
press the {
{{
{Start}
}}
} key.
Printing starts automatically after
trial print is delivered.
Note
❒ If you want to check the print
image, press the {
{{
{Auto Cycle}
}}
}
key to turn off Auto Cycle mode
before pressing the {
{{
{Start}
}}
} key.
For details, see p.14 “When
Auto Cycle is off”.
ZDCH120E
PinkGold-F_V4_FM.book Page 46 Tuesday, May 27, 2003 3:33 PM