User Tools Menu
57
3
User Tools Menu
No. Mode Function
1 Resettable Master
Count
The total number of masters is displayed. To clear it, hold
down the {
{{
{Clear/Stop}
}}
} key for at least 3 seconds.
2 Resettable Print Count The total number of prints is displayed. To clear it, hold
down the {
{{
{Clear/Stop}
}}
} key for at least 3 seconds.
3 Auto Reset The machine returns to its initial condition automatically
after the job is finished. The automatic reset time can be set
from 1 to 5 minutes or no.
Note
❒ Default: no
❒ Adjustment value:
• 0: no
• 1 – 5 minutes
4 Auto Energy Saving You can set the time until the Energy Saver mode starts.
Note
❒ Default: 3 minutes
❒ Adjustment value:
• 0: oFF
• 1 – 120 minutes
5 Minimum Print Quan-
tity
You can set the minimum number of prints with the num-
ber keys.
Note
❒ Default: 0
❒ Adjustment value: 0 – 9999
6 Maximum Print
Quantity
You can set the maximum number of prints with the num-
ber keys.
Note
❒ Default: 9999
❒ Adjustment value: 0 – 9999
7 Copy Count Display The counter can be set to show the number of prints made
(Up), or the number of prints left to be made (Down).
Note
❒ Default: oFF (Down)
❒ Adjustment value:
• 0: oFF (Down)
• 1: on (Up)
PinkGold-F_V4_FM.book Page 57 Tuesday, May 27, 2003 3:33 PM
To Next Page
Loading...
