Ricoh Gestetner 5430 - 4. Replenishing Supplies; Loading Paper on the Paper Feed Tray

Color Printing Using the Optional Color Drum
53
2
D
DD
D
Remove the prints from the paper
delivery tray and place them on
the paper feed tray again as
shown in the illustration.
E
EE
E
Change the drum unit.
Reference
See p.50 “Changing the Color
Drum Unit”.
F
FF
F
Place the second original, and
then press the {
{{
{Start}
}}
} key.
Printing starts automatically after
trial print is delivered.
Note
❒ If you want to check the print
image, press the {
{{
{Auto Cycle}
}}
}
key to turn off Auto Cycle mode
before pressing the {
{{
{Start}
}}
} key.
For details, see p.14 “When
Auto Cycle is off”.
PinkGold-F_V4_FM.book Page 53 Tuesday, May 27, 2003 3:33 PM