User Tools Menu
61
3
21 Cancel Combine You can select whether Combining Originals mode is
cleared after finishing the print job.
Note
❒ Default: oFF
❒ Adjustable value:
• 0: oFF
• 1: on
❒ Even if you select “1” in this mode, Combining Origi-
nals mode is not cleared when the next original are set
in the optional document feeder.
❒ For details about Combining Originals, see p.39 “Com-
bining Originals”.
22 Skip Feed Number When you use the Skip Feed Printing function, you can se-
lect how many times the drum rotates while one sheet of
paper is fed.
Note
❒ Default: 2 times
❒ Adjustment value: 2 – 9 times
23 Memory Print Each print set or stack will contain the number of prints
you program in Memory mode.
If set to Memory, Memory mode will work.
If set to Stack, Stack mode will work.
Note
❒ Default: Memory
❒ Adjustment value:
• 0: Memory
• 1: Stack
❒ For details about Memory mode, see p.36 “Memory
Mode”.
24 Auto Memory/Class
Move
In this function, the machine stops printing for 2 seconds
after one set of prints are completed in Memory mode and
Class mode. This gives you the chance to separate each set
when you do not have an optional tape dispenser.
For example, you can remove prints one by one from the
paper delivery tray or insert one sheet of paper between
the prints.
Note
❒ Default: oFF
❒ Adjustment value:
• 0: oFF
• 1: on
No. Mode Function
PinkGold-F_V4_FM.book Page 61 Tuesday, May 27, 2003 3:33 PM
To Next Page
Loading...
