116
THE SETUP MENU
Recall My Settings
Copy settings from a “box” to MY1, MY2, or MY3.
1
Select a destination.
Highlight the destination
for the stored settings (MY1,
MY2, or MY3) and press
$.
2
Select the source.
Highlight the settings “box”
that will be assigned to the se-
lected position on the mode
dial and press C/D.
To exit without assigning settings to the mode dial,
press the DISP. button.
Caution
If Edit My Settings is used to edit boxes that are currently as-
signed to the mode dial, the changes will be reflected when the
mode dial is rotated to the position assigned to the box. Changes
to settings assigned directly to MY1, MY2, or MY3 are not however
reflected in the boxes currently assigned to the mode dial, and if
the boxes are subsequently changed, these changes will not be
reflected in the settings assigned to MY1, MY2, or MY3.
To Next Page
Loading...
