166
TECHNICAL NOTES
Cautions
• Disconnect the AC adapter and unplug it from the power outlet
when not in use.
• Data may become corrupted if the AC adapter is disconnected or
power is interrupted while the camera is on.
• The battery indicator ( ) may be displayed while the AC
adapter is in use. This is normal, and you can continue using the
camera.
• Do not pick up the camera by the cable when the AC adapter is
attached.
Disconnecting the AC Adapter
Be sure the camera is off before disconnecting the AC
adapter.
1
Unplug the adapter.
2
Open the battery/card cover.
Slide the release lever to “OPEN” and open the cover.
3
Remove the AC adapter coupler.
4
Close the battery/card cover.
Close and latch the cover.
To Next Page
Loading...
