The machine status and remaining amount of consumables are displayed.
You can access Web Image Monitor more quickly by registering the machine's URL as a bookmark. Note
that the URL you register must be the URL of the top page, which is the page that appears before login. If
you register the URL of a page that appears after login, Web Image Monitor will not open properly from the
bookmark.
To change the settings, click [Login] at the top right on the screen and enter the User Name and Password.
Recommended Web Browser
Windows macOS
Internet Explorer 11 or later Safari 3.0 or later
Firefox 52 or later Firefox 52 or later
Google Chrome version 50 or later Google Chrome version 50 or later
Microsoft Edge 20 or later -
You can use the screen reader software JAWS 7.0 or later on Internet Explorer.
When you use a DNS server or WINS server, you can use Host Name instead of IP address to connect the
server.
When the screen is distorted or the operation is unstable, confirm that "JavaScript" or "Use Cookies" is
specified to Active on the computer.
When using Host Name under Windows Server 2008 or later in the IPv6 environment, resolve Host Name in
the external DNS server. You cannot use the host file.
When specifying the settings from Web Image Monitor, do not log in to the machine from the control panel.
The setting value may not be reflected.
If you are using a proxy server, change the web browser settings so that no data goes through the proxy
server to connect to this machine. Contact your administrator for information about the settings.
If you click your browser's back button but the previous page does not appear, click the browser's refresh
button and try again.
To Next Page
Loading...
