User GuideIM 7000/8000/9000
Top Page>Troubleshooting>When a Message Appears and the Machine Cannot Be Operated
When a Message Appears and the Machine
Cannot Be Operated
Message Condition Solution and reference
“Service Call”
SCxxx-xx
Contact
Serial No. of Machine
The machine needs to
be repaired.
Consider repairing the machine.
“Functional
Problems”
SCxxx-xx
Contact
Serial No. of Machine
A malfunction that
requires maintenance or
repair has occurred.
Prepare for maintenance or consider repairing the
machine.
If a message prompts you to turn the
power of the machine off and then on, the
problem may be resolved by turning off the
power, waiting for 10 seconds or more
after confirming that the main power
indicator is turned off, and then turning on
the power.
Turning On and Off the Power
When “Press [Cancel] to cancel
functions” is displayed, you can
continue using the machine except for the
function in which the malfunction is
occurring after pressing [Cancel].
“Please wait.” The machine is
recovering from the
sleep mode.
Wait a while. Turn off the power of the machine if
the message persists after five minutes, wait for
10 seconds or more after confirming that the main
power indicator is turned off, and then turn on the
power.
Turning On and Off the Power
“Please wait.” The machine is
preparing to perform a
function or executing
the image stabilization
process.
Wait a while and do not turn off the power of the
machine.
The ambient
temperature is outside
the temperature range
specified for the
machine operation.
Check the room temperature and whether it
satisfies the operational requirements of the
machine. If the machine has just been moved to
the current location, leave it be for some time and
allow it to adapt to the environment before use.
To Next Page
Loading...
