Ricoh IM 8000

2023/05/01 14:32
Access Control | User Guide | IM 7000, IM 8000, IM 9000
https://support.ricoh.com/services/device/ccmanual/IM_7000-8000-9000-re/en-GB/security/int/control.htm
9/12
NetBIOS over TCP/IPv4 - -
WSD (Device)
WSD (Printer)
WSD (Scanner)
WSD (Encrypted Communication
of Device)
- -
RHPP - -
*1 The same settings are applied to IPv4 and IPv6.
*2 TCP/IP setting is not controlled by the security level. Specify manually whether to enable or disable this setting.
*3 IPP-SSL Communication is enabled under Windows 8.1 or later.
*4 This is enabled under Windows 8.1 or later.
SNMP ( : Enabled -: Disabled)
Function Level 0 Level 1 FIPS 140 Level 2
SNMP
Permit Settings by SNMPv1
and v2
- - -
SNMPv1, v2 functions - -
SNMPv3 FUNCTION
Permit SNMPv3
Communication
Encryption/Cleartext Encryption
/Cleartext
Encryption
Only
Encryption
Only
TCP/IP Encryption Strength Setting
Function Level 0 Level 1 FIPS 140 Level 2
IPsec - - - -
IEEE 802.1X(wired) - - - -
IEEE
802.1X(wired)>Authentication
Method
- - - -
S/MIME > Encryption 3DES-168bit 3DES- 3DES- AES-256bit
*4 *4