CIP Training L5160/L5130
Throughput
• When you replace the cleaning cartridge, do not touch
the sensors that are shown in the
following illustration.
Touching these sensors may cause malfunctions.
DWT214
1. Open the right cover.
DWT183
2. Pull out the used cleaning cartridge upward.
Hold the knobs on both sides of the cleaning cartridge and lift it straight up.
When removing the nozzle cleaning cartridge, be sure to hold the knobs on its
sides. If you do not, the hook may be damaged.
DWT196
1
2
EDP006
1. Knob
2. Hook
3. Take the new cleaning cartridge out of the box.
Put the used cleaning cartridge in the supplied plastic bag.
To Next Page
Loading...
