CIP Training L5160/L5130
Throughput
5. Wipe off any ink that dripped around the tube, and then install the new waste ink bottle.
When installing the waste ink bottle, insert the tube into the spout of the bottle.
DWT205
1
2
6. Press [Reset].
7. Press [0] to set the waste ink level to 0%.
8. Press [Set].
9. Press [End].
• When printing is interrupted, the confirmation screen will be displayed after replacing the
waste ink bottle. Press [Resume] to restart printing. However, the quality of the print
cannot be guaranteed.
To Next Page
Loading...
