Technical Bulletin PAGE: 5/5
Reissued: 26-Apr-11
Model: Al-P1 Date: 13-Mar-08 No.: RG179008k
Version Modified Points or Symptom Corrected
Maintenance > Image Density Adjustment) appears to revert to default after a power
cycle. Though the default value is shown if viewed in the operation panel, the actual
value used by the machine is correct.
Other changes:
1. The IPDS option is now available.
To use this option, System firmware (version 1.08 or later), NCS firmware (version
7.14 or later), Websys firmware (version 1.12 or later) and Printer firmware (version
1.08 or later) needs to be applied to the device.
1.00 1st Mass production
To Next Page
Loading...
Need help?
General
