Technical Bulletin PAGE: 1/5
Reissued: 10-May-11
Model: Al-P1 Date: 13-Mar-08 No.: RG179002i
RTB Reissue
The items in bold italics have been corrected.
Subject: Firmware Release Note: Network Support Prepared by: T. Hirakawa
From: 1st Overseas Tech Support Sec., 1st PQM Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2
This RTB has been issued to announce the firmware release information for the Network
Support.
Version Program No. Effective Date Availability of RFU
7.36 G1795742K May 2011 production Not available
7.34 G1795742J October 2010 production Not available
7.31 G1795742H March 2010 production Available
7.30 G1795742G January 2010 production Available
7.26 G1795742F June 2009 production Available
7.24.1 G1795742E February 2009 production Available
7.20 G1795742D
November 2008
production
Available
7.17 G1795742C
September 2008
production
Available
7.14 G1795742B June 2008 production Available
7.05.1 G1795742A 1st Mass production Available
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Version Modified Points or Symptom Corrected
7.36 Symptom corrected:
1. An httpd timeout has been implemented to prevent Web ImageMonitor
lockups that sometimes occurred when applications accessed the printer
by http.
2. If Windows Authentication is enabled, printing a large number of copies of
a job might take longer than might typically be expected.
3. Chunk Transfer Encoding over an IPP port might results in print jobs being
reset.
4. If SSDP = Active (Web ImageMonitor > Configuration > Network Security), a
high load on the CPU might result in Web ImageMonitor locking up.
5. LP with an external controller will lose network connectivity. This only
occurred if the network settings were changed repeatedly and the LP's
"NetWare" setting was already "Active" (before the network settings were
changed).
6. The LP icon might not be shown in the Windows "Network" dialogue if
SSDP is enabled. This affected Windows Vista, 2008/R2, and 7.
To Next Page
Loading...
Need help?
General
