SmartDeviceMonitor for Admin is an application that uses TCP/IP and IPX/SPX to monitor network printers.
It can monitor multiple network printers using IP address. We recommend that network administrators use
this application.
File path
SmartDeviceMonitor for Admin is stored in the following folder in the CD-ROM labeled “Printer Drivers
and Utilities”:
\NETWORK\DEVMON\ADMIN\DISK1
Operating system Protocol stack
Windows 2000 TCP/IP provided with Windows 2000
IPX/SPX provided with Windows 2000
NetWare Client provided with Windows 2000
Novell Client provided with Windows 2000
Windows XP TCP/IP provided with Windows XP
IPX/SPX provided with Windows XP
NetWare Client provided with Windows XP
Novell Client provided with Windows XP
Windows Vista TCP/IP provided with Windows Vista
Novell Client provided with Windows Vista
Windows Server 2003 TCP/IP provided with Windows Server 2003
IPX/SPX provided with Windows Server 2003
NetWare Client provided with Windows Server 2003
Novell Client provided with Windows Server 2003
Windows Server 2008 TCP/IP provided with Windows Server 2008
Novell Client provided with Windows Server 2008
Available functions
SmartDeviceMonitor for Admin has the functions to check the followings:
•
Printer supplies such as paper or toner
• Results of print jobs executed from the computer
• For details, see Network and System Settings Guide , and SmartDeviceMonitor for Admin Help.
Software and Utilities Included on the CD-ROM
107
To Next Page
Loading...
