Unusable Paper
This section describes paper unusable on this machine.
• To avoid fire or machine failure, do not use aluminum foil, carbon paper, or similar conductive
paper.
• To prevent faults, do not use any of the following kinds of treated paper:
•
Paper for inkjet printers
• Thermal fax paper
• Art paper
• Aluminum foil
• Carbon paper
• Conductive paper
• Paper with perforated lines
• Hemmed-edge paper
• Tab stock
• Certain types of OHP transparencies for colour printing cannot be used. For details about types that
can be used, contact your sales or service representative.
• Faults can occur if you copy or print onto sides that are already printed. Take care to copy or print
onto unprinted sides only.
• To prevent misfeeds, do not use the following kinds of paper:
•
Bent, folded, or creased paper
• Perforated paper
• Slippery paper
• Torn paper
• Rough paper
• Thin paper with little stiffness
• Paper with a dusty surface
• If you copy or print onto rough grain paper, the output image might be blurred.
• Do not load sheets that have already been printed onto by another machine. (Sheets can become
jammed if they have been improperly stored.)
Unusable Paper
73
To Next Page