Handling the machine's interior
This section explains safety precautions about handling the machine's interior.
• To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or
screws other than those specified in this manual.
• The
fusing section of this machine might be very hot. Caution should be taken when removing misfed
paper.
• The
inside of the machine could be very hot. Do not touch the parts with a label indicating the “hot
surface”. Otherwise, an injury might occur.
• When loading paper, take care not to trap or injure your fingers.
• During operation, rollers for transporting the paper and originals revolve. A safety device has
been installed so that the machine can be operated safely. But take care not to touch the machine
during operation. An injury might occur.
• Fire and breakdown can result from heavy accumulation of dust inside this machine. Consult your
service representative for details about and charges for cleaning the machine's interior.
Handling the machine's supplies
This section explains safety precautions about handling the machine's supplies.
• Do
not incinerate used toner or toner containers. Toner dust might ignite when exposed to an open
flame. Dispose of used toner containers in accordance with local regulations.
• Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open
flame.
• Do
not store toner, used toner, or toner containers in a place with an open flame. The toner might
ignite and cause burns or a fire.
20
To Next Page
Loading...
Need help?
General