33. [OK] key
Press to set a selected item or an entered numeric value.
34.
[
] key (Enter key)
Press to set a selected item or an entered numeric value.
35.
[Start] key
Press to start copying, printing, scanning, or sending.
36. [Clear/Stop] key
• Clear
Clears an entered numeric value.
• Stop
Stops a job in progress, such as copying, scanning, faxing, or printing.
37. Operation switch
Press to turn the power on (the operation switch indicator goes on). To turn the power off, press again (the
operation switch indicator goes off). See “Turning On/Off the Power”.
• p.44 "Display Panel"
•
p.50 "Changing Modes"
• p.52 "Turning On/Off the Power"
• p.79 "Entering Text"
• p.101 "Counter"
Control Panel
43
To Next Page
Loading...
