Ricoh MP C2011

Messages Causes Solutions
"The selected paper type is
not supported. This job has
been cancelled."
Job reset is automatically
performed if the specified
paper type is incorrect.
Specify the correct paper type, and
then print the file again.
When there is a problem with the print settings
Messages Causes Solutions
"Classification Code is
incorrect."
The classification code has
not been entered, or the
classification code has been
entered incorrectly.
Enter the correct classification code.
"Classification Code is
incorrect."
The classification code is not
supported with the printer
driver.
Select [Optional] for classification
code. For details about how to specify
classification code settings, see
"Configuring Classification Codes",
Print.
"Duplex has been
cancelled."
Duplex printing was
canceled.
• Select an appropriate paper size
for the duplex function. For details
about paper, see "Specifications
for the Main Unit", Maintenance
and Specifications.
• Change the setting for "Apply
Duplex" in [System Settings] to
enable duplex printing for the
paper tray. For details about
setting "Apply Duplex", see "Tray
Paper Settings", Connecting the
Machine/ System Settings.
"Exceeded max. pages.
Collate is incomplete."
The number of pages
exceeds the maximum
number of sheets that you
can use Collate with.
Reduce the number of pages to print.
Messages Displayed When Using the Printer Function
147