Ricoh MP C6502 Series User Manual

Entering the Path to the Destination Manually
1. Press [Manual Entry].
2. Press [SMB].
3. Press [Manual Entry] on the right side of the path field.
4. Enter the path for the folder.
In the following example path, the shared folder name is "user" and the computer name is
"desk01":
\\desk01\user
5. Press [OK].
6. Depending on the destination setting, enter the user name for logging in to the computer.
Press [Manual Entry] to the right of the user name field to display the soft keyboard.
7. Depending on the destination setting, enter the password for logging in to the computer.
Press [Manual Entry] for the password to display the soft keyboard.
8. Press [Connection Test].
A connection test is performed to check whether the specified shared folder exists.
9. Check the connection test result, and then press [Exit].
10. Press [OK].
6. Scan
106

Ricoh MP C6502 Series Specifications

General

Functions	Print, Copy, Scan, Fax
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Fax Transmission Speed	3 seconds per page
Print Speed	65 ppm (black/white and color)
Print Resolution	1200 x 4800 dpi
Connectivity	USB, Ethernet, Wi-Fi
Scan Speed	Up to 120 ipm (B/W, Color)
Scan Resolution	600 dpi