Ricoh MP C6502 Series User Manual

Message Causes Solutions
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
The destination list is being
updated from the network
using Web Image Monitor.
Wait until the message disappears. Do
not turn off the power while this
message is displayed. Depending on
the number of destinations to be
updated, there may be some delay
before you can resume operation.
Operation is not possible while this
message is displayed.
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
A specified destination or
sender's name was cleared
when the destination list in
the delivery server was
updated.
Specify the destination or sender's
name again.
When Data Cannot Be Sent Due to a Problem with the Destination
Message Causes Solutions
"Some invalid destination(s)
contained. Do you want to
select only valid
destination(s)?"
The specified group contains
fax destinations, e-mail
destinations, and/or folder
destinations, either of which
are incompatible with the
specified transmission
method.
In the message that appears at each
transmission, press [Select].
"SMTP authentication E-mail
address and Administrator
E-mail address mismatch."
The SMTP authentication e-
mail address and the
administrator's e-mail
address do not match.
For details about how to set SMTP
authentication, see "File Transfer",
Connecting the Machine/ System
Settings .
When Other Messages Appear
229

Ricoh MP C6502 Series Specifications

General

Functions	Print, Copy, Scan, Fax
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Fax Transmission Speed	3 seconds per page
Print Speed	65 ppm (black/white and color)
Print Resolution	1200 x 4800 dpi
Connectivity	USB, Ethernet, Wi-Fi
Scan Speed	Up to 120 ipm (B/W, Color)
Scan Resolution	600 dpi