2. Getting Started
This chapter describes how to start using this machine.
Guide to Names and Functions of Components
• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal
components.
Front and left view
1. ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
The ADF scans both sides of an original simultaneously.
2. Exposure glass
Place originals face down here.
3. Control panel
See "Guide to the Names and Functions of the Machine's Control Panel".
4. Front cover
Open to change toner cartridges.
31
To Next Page
Loading...
Need help?
General
