Recommended Paper Sizes and Types
This section describes recommended paper sizes and types.
• If you use paper that curls, either because it is too dry or too damp, a staple clogging or paper jam
may occur.
• Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a
misfeed.
• When you load OHP transparencies, check the front and back of the sheets, and place them
correctly, or a misfeed might occur.
Tray 1
Paper type and weight Paper size Paper capacity
52.3–256.0 g/m
2
(14.0 lb.
Bond–141.0 lb. Index)
Thin Paper–Thick Paper 3
A4
8
1
/
2
× 11
1250 sheets × 2
52.3–256.0 g/m
2
(14.0 lb.
Bond–141.0 lb. Index)
Thin Paper–Thick Paper 3
*1
8
1
/
2
× 11
A4
1250 sheets × 2
*1
To load paper any of the sizes specified above, contact your service representative.
Tray 1 (A3/11 × 17 tray unit)
Paper type and weight Paper size Paper capacity
52.3–256.0 g/m
2
(14.0 lb.
Bond–141.0 lb. Index)
Thin Paper–Thick Paper 3
A3
11 × 17
1000 sheets
9. Adding Paper and Toner
146
To Next Page
Loading...
Need help?
General
