Ricoh MP C6502 Series User Manual

Message Causes Solutions
"The selected paper type is
not supported. This job has
been cancelled."
Job reset is automatically
performed if the specified
paper type is incorrect.
Specify the correct paper type, and
then print the file again.
"Z-fold error." Z-folding was canceled. Check the tray, paper orientation, print
orientation, and Z-fold settings again.
When there is a problem with the print settings
Message Causes Solutions
"Booklet/Half Fold Error" The job was canceled
because you specified
invalid settings for saddle
stitching or half fold.
Check the settings for saddle stitching or
half fold.
"Classification Code is
incorrect."
The classification code has
not been entered, or the
classification code has
been entered incorrectly.
Enter the correct classification code.
"Classification Code is
incorrect."
The classification code is
not supported with the
printer driver.
Select [Optional] for classification code.
For details about how to specify
classification code settings, see
"Configuring Classification Codes", Print
.
"Duplex has been
cancelled."
Duplex printing was
canceled.
• Select the proper paper size for the
duplex function. For details about
paper, see "Specifications for the
Main Unit", Maintenance and
Specifications .
• Change the setting for "Apply
Duplex" in [System Settings] to
enable duplex printing for the paper
tray. For details about setting "Apply
Duplex", see "Tray Paper Settings",
Connecting the Machine/ System
Settings .
Messages Displayed When Using the Printer Function
201

Ricoh MP C6502 Series Specifications

General

Functions	Print, Copy, Scan, Fax
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Fax Transmission Speed	3 seconds per page
Print Speed	65 ppm (black/white and color)
Print Resolution	1200 x 4800 dpi
Connectivity	USB, Ethernet, Wi-Fi
Scan Speed	Up to 120 ipm (B/W, Color)
Scan Resolution	600 dpi