Ricoh P C300W - Loading Paper into Bypass Tray

Loading Paper into Bypass Tray
• Do not load paper while the machine is printing.
• Load paper with the print side down and in the short-edge feed direction.
• Curled paper may jam. Straighten curled paper before loading.
• Duplex printing is not possible.
• Tray 1 and 2 are unavailable if paper is loaded in the bypass tray.
• You cannot load paper into the bypass tray while the machine is in Energy Saver mode.
1. Insert the top edge of the paper into the machine.
ECC112
2. Adjust the paper guides to the paper size.
ECC113
Loading Paper
31