Ricoh P C301W - Page 10

8
4. Press the [ ] or [ ] key to select [Quit Setup], and then the
[OK] key.
ECB240
Quit Setup
IPv4 Configuration
IPv6 Configuration
44
Network Wizard
5. Press the [Menu] key.
ECB202
6. Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
ECB206
Print List/Report
Network Settings
Wi-Fi Setup Wizard
86
Settings
7. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and
then press the [OK] key.
ECB207
IPv4 Configuration
Wireless (Wi-Fi)
Wired (Ethernet)
51
Network Settings
8. Press the [ ] or [ ] key to select [WPS], and then press the
[OK] key.
ECB215
Current Connection
Input SSID
WPS
96
Wireless (Wi-Fi)
9. Press the [ ] or [ ] key to select [PIN], and then press the
[OK] key.
WPS Type
22
PIN
PBC
DSG096
10. Check the PIN code.
ECB217
AbortConnect
XXXXXXXX
PIN Code:
PIN
Write down the PIN code in case you might forget it.
11.
Enter the machine's PIN code (8 digits) on the router (access
point)'s web page (The web page accessed in Step 2).
12. Execute WPS (PIN system) from the router (access point)’s
web page.
13. Press the [ ] or [ ] key to select [Connect], and then press
the [OK] key.
ECB217
AbortConnect
XXXXXXXX
PIN Code:
PIN
"Please wait for 2 minutes" appears and connecting with PIN
method starts.
14. Check the result.
Connection has succeeded:
ECB229
EXIT
has Succeeded
Connection to AP
PIN
• Press the [OK] key to return to the screen displayed in Step 6,
and then press the [Menu] key to return to the initial screen.
Connection has failed:
ECB230
EXIT
has Failed
Connection to AP
PIN
• Press the [OK] key to return to the screen displayed in Step 6.
Check the conguration for the router (access point),then try
the connection again.
15. Configuring the Wi-Fi settings is complete.
To use the printer driver, install the printer driver
according to the procedure on page 10 "3. Installing
the Printer Driver".