Item Description
Security Settings Specify the user account security setting by selecting one of the following:
[Authentication Encryption]: It is necessary to specify [Authentication
Algorithm], [Authentication Password], [Encryption Algorithm], and
[Encryption Password].
[Authentication Non-Encryption]: It is necessary to specify [Authentication
Algorithm] and [Authentication Password]. [Encryption Algorithm] and
[Encryption Password] cannot be specified.
[Non-Authentication Non-Encryption]: [Authentication Algorithm],
[Authentication Password], [Encryption Algorithm] and [Encryption
Password] cannot be specified.
Authentication
Algorithm
Specify the authentication algorithm from the following:
[MD5], [SHA1], [SHA224], [SHA256], [SHA384], [SHA512]
Authentication
Password
(Required)
Enter a password for the User account. Can contain up to 32 characters.
Encryption Algorithm Specify the encryption algorithm from the following:
[AES128], [DES]
Encryption Password
(Required)
Enter a password for encrypting the User account password.
Can contain up to 32 characters.
MIB Access Type Select an access type for the user account to access MIB from the following:
[read-only], [Not-Accessible]
Admin Account
Item Description
User Name
(Required)
Enter the user name for logging in to the SNMPv3. Can contain up to 32
characters.
Configuring the Network Settings
115
To Next Page
Loading...
