• Open any cover
• Open any paper tray
Sleep Mode
The printer enters Sleep mode when:
• The printer waits before entering Sleep mode is set in [Sleep Mode Timer]
• It is the day and time specified in [Weekly Timer]
Power consumption is minimized.
The printer can print jobs from computers.
You can change the amount of time that the printer waits before switching to Sleep mode.
Under [Weekly Timer], you can specify the times and the days of the week that the machine enters
Sleep mode.
Only the administrator can specify [Weekly Timer] when administrator authentication is enabled.
See "Maintenance", User Guide (Full Version).
To exit Sleep mode, press one of the keys on the control panel.
• The energy saving functions are disabled when an error occurs or while an operation is in
progress.
Turning On and Off the Power
9
To Next Page
Loading...
