1. Open the bypass tray.
Pull the extender out when loading A4 , 8
1
/
2
× 11 or larger paper.
2. Load paper face up until it stops, and then adjust both sides of the paper guide to match
the paper width.
• When using the bypass tray, it is recommended that you set the paper direction to .
• Letterhead paper must be loaded in a specific orientation.
• page 94 "Loading Orientation-fixed Paper or Two-sided Paper"
• You can load envelopes into the bypass tray. Envelopes must be loaded in a specific orientation.
4. Adding Paper and Toner
82
To Next Page
Loading...
