Ricoh PJ X6180N User Manual

161
8. User Supportware
1 Installing Software Program
Installation for Windows software
The software programs except Advanced Network Utility for Mac support Windows 7, Windows Vista, and Windows XP.
NOTE:
• To install or uninstall each software program, the Windows user account must have “Administrator” privilege (Windows 7, Win-
dows Vista) or “Computer Administrator” privilege (Windows XP).
• Exit all running programs before installation. If another program is running, the installation may not be completed.
• Advanced Network Utility will be installed to the system drive of your computer.
If the message “There is not enough free space on destination” is displayed, free up enough space (about 100 MB) to install the
program.
1 Insert the accompanying CD-ROM into your CD-ROM drive.
The menu window will be displayed.
TIP:
If the menu window will not be displayed, try the following procedure.
For Windows 7
1. Click “Start” on Windows.
2. Click “All Programs” → “Accessories” → “Run”.
3. Type your CD-ROM drive name (example: “Q:\”) and “LAUNCHER.EXE” in “Name”. (example: Q:\LAUNCHER.
EXE)
4. Click “OK”.
The menu window will be displayed.

Ricoh PJ X6180N Specifications

General

Brightness	6000 lumens
Resolution	XGA (1024 x 768)
Light Source	Lamp
Image Size	30 - 300 inches
Speaker	10W
Display Technology	DLP
Lamp Type	UHP
Native Resolution	XGA (1024 x 768)
Lamp Life	4000 hours (Normal mode), 5000 hours (Eco mode)
Keystone Correction	Vertical ±30°
Input Terminals	HDMI, VGA, USB
Output Terminals	VGA
Control Terminals	RS-232C
Networking	LAN
Power Consumption	350W (Normal mode), 280W (Eco mode)
Input Ports	HDMI, VGA, USB
Output Ports	VGA
Noise Level	37 dB (Normal)