Ricoh Pro C7100

Message Cause Solution
"Error occurred while
processing an Unauthorized
Copy Prevention job. Job
cancelled."
The resolution is set to a
value less than 600 dpi
when [Unauthorized Copy
Prevention] is specified.
On the printer driver, set the resolution
to 600 dpi or higher, or cancel
[Unauthorized Copy Prevention].
"Error occurred while
processing an Unauthorized
Copy Prevention job. Job
cancelled."
A color other than black was
specified as the pattern color
when a command was used
to specify Unauthorized
Copy Prevention for Pattern
for a document and print it.
Specify black as the pattern color.
"Error occurred while
processing an Unauthorized
Copy Prevention job. Job
cancelled."
In [Administrator Tools]
under [System Settings],
priority was specified to be
given to Unauthorized Copy
Prevention Printing set on this
machine.
Cancel Unauthorized Copy Prevention
Printing for the printer driver. For details
about how to cancel the settings, see
the printer driver Help.
"Collate Cancelled" Collate was canceled. Turn off the power, and then back on
again. If the message appears again,
contact your service representative.
"You reach the usage limit.
This job has been
cancelled."
The number of pages the
user is permitted to print has
been exceeded.
For details about print volume use
limitation, see Security Guide.
"Exceeded the maximum
number of multi-sheet fold.
The job has been
cancelled."
The maximum number of
Multi-sheet Fold was
exceeded.
Specify fewer sheets for the Multi-sheet
Fold function. For details about the
maximum number of Multi-sheet Fold,
see "Specifications for Multi-Folding
Unit", Maintenance and Specifications.
"Fold is not available with
the settings. The job has
been cancelled."
Fold function is not available
with the current settings.
Check the paper settings. For details
about the limitations of the Fold
function, see "Fold", Print.
"Receiving data failed." Data reception was aborted. Resend the data.
"Sending data failed." The machine received a
command to stop
transmission from the printer
driver.
Check if the computer is working
correctly.
Messages Displayed When You Use the Printer Function
117