Message Cause Solution
"The entered file name
contains invalid character(s).
Enter the file name again
using any of the following 1
byte characters. "0 to 9", "A
to Z", "a to z", ". - _"
The file name contains a
character that cannot be used.
• Check the file name set at the
time of scanning. For details
about characters that can be
used in file names, see
"Specifying the file name",
Basic Operations.
• Check the file name specified
at the time of scanning. The
file name specified in the
Sending Scan Files to Folders
function cannot contain the
following characters:
\ / : * ? " < > |
The file name cannot start or end
with a period ".".
"The program is recalled.
Cannot recall the
destination(s) for which
access privileges are
required."
The currently logged-in user
does not have permission to
view the destination that was
registered in the program.
For details about how to set
permissions, see "Restricting
Usage of the Destination List",
Security Guide.
"The program is recalled.
Cannot recall the
destination(s) that is deleted
from the address book."
The destination stored in the
program could not be recalled
because it was deleted from the
address book.
Enter the destination directly to
send data separately.
"The program is recalled.
Cannot recall the folder
destination(s) with protection
code(s)."
The folder destinations for which
the protection code was set
were registered in the program.
A destination for which the
protection code is set cannot be
recalled by the program. Cancel
the protection code setting or send
scanned files to the destination
separately.
When Messages Appear
449
To Next Page
Loading...
