When there is a problem with a parameter
Message Cause Solution
"86: Error" Parameters of the control
code are invalid.
Check the print settings.
When the user lacks privileges to perform an operation
Message Cause Solution
"No response from the
server. Authentication has
failed."
A timeout occurred while
connection to the server
was being established for
LDAP authentication or
Windows Authentication.
Check the status of the server.
"Printing privileges have
not been set for this
document."
You have no privileges to
print the PDF document
you tried to print.
Contact the owner of the document.
"You do not have a
privilege to use this
function. This job has been
cancelled."
The entered login user
name or login password is
not correct.
Check that the user name and
password are correct.
"You do not have a
privilege to use this
function. This job has been
cancelled."
The logged in user is not
allowed to use the selected
function.
For details about how to set
permissions, see "Limiting Available
Functions", Security Guide.
When a user cannot be registered
Message Cause Solution
"Auto-registration of user
information has failed."
Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed
because the Address Book
is full.
For details about automatic
registration of user information, see
"Auto Registration to the Address
Book", Security Guide.
When Messages Appear
443
To Next Page
Loading...
