Ricoh PRO C7210X - Page 250

1.SC Codes
246
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
 Replace the jog fence front motor.
 Replace the jog fence front HP sensor
 Replace the master control board.
 Replace the motor harness.
 Replace the sensor harness.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC751-
76
D
Perfect Binder: Jog fence large HP sensor late error
While large-size paper was being jogged, the front jog fence large HP sensor did
not go ON, even though the jog fence front motor operated long enough for 70mm
of feed.
 Jog fence front large HP sensor defective
 Front jog fence motor defective
 Reconnect the connector.
 Replace the jog fence front motor.
 Replace the Jog fence front large HP sensor.
 Replace the master control board.
 Replace the motor harness.
 Replace the sensor harness.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC751-
77
D
Perfect Binder: Jog fence front large HP sensor lag error
While large-size paper was being jogged, the jog fence front large HP sensor did
not go OFF after the front jog fence motor operated long enough for 20 mm of
feed.
 Jog fence front large HP sensor defective
 Jog fence front motor defective
 Connector loose, broken, defective
 Reconnect the connector.
 Replace the jog fence front motor.
 Replace the Jog fence front large HP sensor.
 Replace the master control board.
 Replace the motor harness.
 Replace the sensor harness.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC751-
D
Perfect Binder: Jog fence front HP sensor late error