Unusable Paper
This section describes paper unusable on this machine.
• Do not attempt to print on stapled sheets, aluminum foil, carbon paper, or any kind of conductive
paper. Doing so risks fire.
• To prevent faults, do not use any of the following kinds of treated paper:
• Paper for inkjet printers
• Aluminum foil
• Carbon paper
• Conductive paper
• Paper with perforated lines
• Hemmed-edge paper
• OHP transparencies
• Faults can occur if you print onto sides that are already printed. Take care to print onto unprinted sides
only.
• To prevent misfeeds, do not use the following kinds of paper:
• Bent, folded, or creased paper
• Perforated paper
• Torn paper
• Rough paper
• If you print onto rough grain paper, the output image might be blurred.
• Do not reuse paper that has been already printed onto.
4. Appendix
102
To Next Page
Loading...
