Ricoh pro c901 - Specifications for Ring Binder

Specifications for Ring Binder
This section describes specifications for the ring binder.
Paper size (ring binding/comb binding punching):
A4 , 8
1
/
2
× 11
Paper weight (ring binding/comb binding punching):
64 216 g/m
2
(17 lb. Bond 80 lb. Cover)
Ring binding capacity:
100 sheets
Capacity of the ring comb cartridge:
80 ring combs
Ring comb type:
50-sheet type (white, black), 100-sheet type (white, black)
Comb binding punch capacity:
50 sheets
Comb binding punch holes:
23 holes, 21 holes
Ring binder tray capacity:
• 51 to 100 leaf binding: 11 sets
• In comb binding punch mode: 50 sheets
Power source:
120 V, 60 Hz, 5 A
Power consumption:
Maximum 400 W (A separate power source is required.)
Dimensions (W × D × H):
870 × 730 × 980 mm (34.3 × 28.8 × 38.6 inches)
Weight:
Approx. 145 kg (319.7 lb.)
• You can apply 23-hole ring binding or punching to A4 sheets only if the A4 punch unit is installed.
• You can apply 21-hole ring binding or punching to 8
1
/
2
× 11 sheets only if the letter punch unit is
installed.
Specifications for Ring Binder
83
4