Options
This section introduces the names and functions of main optional parts.
External Options
This section provides explanations about external options.
12 3 4 56789
11 12
13
1514
BZW013
10
1. Trimmer
Cuts the fore edge of the book block after the book block is saddle stitched. To use the trimmer, the Booklet
Finisher SR5020 is required.
2. Booklet Finisher SR5020
Sorts, stacks, staples, and punches multiple sheets of paper. The saddle stitch function can staple multiple sheets
of paper in the center and fold them into booklets. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
• Finisher booklet tray
3. Finisher SR5000
Sorts, stacks, staples, and punches multiple sheets of paper. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
4. Stacker
Stacks 5,250 sheets of paper. You can install two stackers.
5. Ring binder
Binds sheets of paper with a ring comb.
6. Z-folding unit
Makes two parallel folds on printed paper, one of which faces in and the other facing out. To use the Z-folding
unit, the Finisher SR5000 or the Booklet Finisher SR5020 is required.
Options
37
To Next Page
Loading...
