When the Authentication Screen is Displayed
This section explains the authentication screen.
• Ask the user administrator for the login user name, login password, and user code. For details about
user authentication, contact your administrator.
• User code to enter on User Code Authentication is the numerical value registered in the Address Book
as “User Code”.
If Basic Authentication, Windows Authentication, LDAP Authentication, or Integration Server Authentication
is active, the authentication screen appears on the display. The machine only becomes operable after
entering your own login user name and login password. If User Code Authentication is active, you cannot
use the machine until you enter the user code.
If you can use the machine, you can say that you are logged in. When you go out of the operable state,
you can say that you are logged out. After logging in the machine, be sure to log out of it to prevent
unauthorized usage.
• If authentication fails, the "Authentication has failed." message appears. Check that the login user
name and login password are correct.
Login (Using the Control Panel)
This section explains the procedure for logging in to the machine when Basic Authentication, Windows
Authentication, LDAP Authentication, or Integration Server Authentication is set.
1. Press [Login].
1. Getting Started
44
To Next Page
Loading...
